[Update Sep 2022] Latest JNCIP-SP JN0-663 dumps exam material
Latest JNCIP-SP JN0-663 dumps exam material has 96 exam questions and answers, verified by Juniper-certified experts to be true and valid, candidates download JN0-663 dumps with PDF and VCE: https://www.leads4pass.com/jn0-663.html
Seriously practice the latest JNCIP-SP JN0-663 exam questions and answers with a 100% guarantee of passing the exam. Plus 365 days of free updates and a 15% discount code: “juniper” from Lead4Pass Professional Certification Materials Center.
Free share JNCIP-SP JN0-663 dumps PDF for candidate detection:
https://drive.google.com/file/d/1OtqEmRjzgFQxk0W3rG1yKZPz5qzRehOL/
Read the latest JNCIP-SP JN0-663 dumps exam questions and answers online
Number of exam questions | Exam name | From | Release time |
15 | Service Provider Routing and Switching, Professional (JNCIP-SP) | Lead4Pass | Sep 11, 2022 |
New Question 1:
You notice an inconsistency between the routing table and the OSPF database, as shown in the exhibit. What are two reasons for this behavior? (Choose two.)
A. The LSA is a Type 4 LSA.
B. An OSPF export policy is being applied to the route.
C. An OSPF import policy is being applied to the route.
D. The LSA is a Type 5 LSA.
Correct Answer: BC
New Question 2:
R2 is receiving the same route from R1 and R3. You must ensure that you can load balance traffic for that route.
Referring to the exhibit, which two configuration changes will allow load balancing? (Choose two.)
A. Apply the prepend policy as an import policy under group R1.
B. Configure multipath under the global BGP configuration.
C. Configure multipath under group R1.
D. Apply the prepend policy as an import policy under group R3.
Correct Answer: AB
New Question 3:
Referring to the exhibit, hosts in Site 1 and Site 2 are unable to communicate with each other through the Layer 3 VPN.
What is the problem?
A. The two sites are in the same AS.
B. The two sites are using the same instance type.
C. The two sites are using the same route target.
D. The two sites are using the same route distinguisher.
Correct Answer: A
New Question 4:
You manage an MX Series device which includes the configuration shown in the exhibit. Traffic marked with DSCP 000011 is entering the ge-1/0/4 interface at 102 Mbps. The traffic exits the device on the ge1/0/5 interface. No other traffic is transiting the router.
In this scenario, what happens to traffic exceeding 100 Mbps?
A. Traffic exceeding 100 Mbps is redirected to a rate limiter.
B. Traffic exceeding 100 Mbps is buffered.
C. Traffic exceeding 100 Mbps is dropped.
D. Traffic exceeding 100 Mbps is forwarded.
Correct Answer: C
New Question 5:
Referring to the ABR configuration shown in the exhibit, which three statements are correct? (Choose three.)
A. The ABR advertises a default route to the NSSA using a Type 7 LSA.
B. The ABR advertises a single Type 3 summary LSA to the backbone area for all Type 1 and Type 2 LSAs in the 192.168.16.0/20 range.
C. The ABR advertises a Type 5 external LSA to the backbone area for each Type 7 LSA in the NSSA.
D. The ABR does not summarize any routes within the 192.168.16.0/20 range.
E. The ABR advertises a single Type 5 external LSA to the backbone area for all Type 7 LSAs in the NSSA.
Correct Answer: ABC
New Question 6:
You are provisioning Layer 2 circuits between sites CE1, CE2, and CE3.
Referring to the exhibit, which statement is true?
A. A point-to-multipoint LSP must be created between sites.
B. Each site must have only one VLAN configured to the PE.
C. Site PE1 must have a point-to-multipoint link configured towards the core.
D. Two VLANs must be configured from PE 1 to CE 1.
Correct Answer: D
New Question 7:
What information is stored in a VRF table for a BGP Layer 2 VPN? (Choose three.)
A. Layer 2 encapsulation
B. local site ID
C. remote interface of local CE device
D. logical interlace provisioned to local CE device
E. label-switched path
Correct Answer: ADE
New Question 8:
Referring to the exhibit, what will the IS-IS cost be for R1 to reach R3?
A. 73
B. 20
C. 301
D. 310
Correct Answer: D
New Question 9:
Referring to the exhibit, traffic sent from CE-A2 to PE3 does not loop back to CE-A2 through PE2.
Winch two EVPN functions accomplish this task? (Choose two.)
A. multicast ingress replication
B. aliasing
C. split horizon
D. designated forwarder election
Correct Answer: CD
New Question 10:
Which two types of LSAs have an area scope? (Choose two.)
A. Type 2
B. Type 5
C. Type 11
D. Type 7
Correct Answer: AC
New Question 11:
Referring to the exhibit, which OSPFv3 configuration is implemented on router R1?
A. set protocols ospf3 area 0.0.0.0 interface ge-0/0/0.0 set protocols ospf3 area 0.0.0.1 interface ge-0/0/1.0 set protocols ospf3 area 0.0.0.1 interface ge-0/0/0.0
B. set protocols ospf3 area 0.0.0.0 interface ge-0/0/0.0 set protocols ospf3 area 0.0.0.1 interface ge-0/0/1.0 set protocols ospf3 area 0.0.0.1 virtual-link neighbor-id 172.16.1.2
C. set protocols ospf3 area 0.0.0.0 interface ge-0/0/0.0 set protocols ospf3 area 0.0.0.1 interface ge-0/0/1.0 set protocols ospf3 area 0.0.0.1 interface ge-0/0/0.0 secondary
D. set protocols ospf3 area 0.0.0.0 interface ge-0/0/0.0 set protocols ospf3 area 0.0.0.1 interface ge-0/0/1.0 set protocols ospf3 area 0.0.0.1 interface ge-0/0/0.0 interface-type p2p
Correct Answer: D
New Question 12:
Your network is connected to two different ISPs and you notice that they are using your network for transit traffic.
In this scenario, which two configuration statements will solve this problem? (Choose two.)
A. set policy-options policy-statement ISP term REST then reject
B. set policy-options policy-statement ISP term ROUTES then reject
C. set policy-options as-path LOCAL-ROUTES “()”
D. set policy-options as-path LOCAL-ROUTES “(65310|65441)+”
Correct Answer: AC
New Question 13:
R2 has IS-IS adjacencies with R3 and R4. You want to ensure that R2 has both a level 1 and level 2 adjacency to both R3 and R4, but R2 only has one adjacency with R4.
Referring to the exhibit, which configuration change will solve this issue?
A. Change the IS-IS area on R4 to match R2.
B. Remove the level 1 disable configuration from R4.
C. Remove the level 1 disable configuration from R2.
D. Change the IS-IS area on R2 to match R4.
Correct Answer: C
New Question 14:
You are asked to configure a series of interface policers and firewall filters, which include policers, on the same device. You must ensure that the two configuration methods do not conflict.
What are two considerations when performing this task? (Choose two.)
A. On inbound traffic, firewall filters are applied before interface policers.
B. On outbound traffic, interface policers are applied before firewall filters.
C. On outbound traffic, firewall filters are applied before interface policers.
D. On inbound traffic, interface policers are applied before firewall filters.
Correct Answer: CD
New Question 15:
Referring to the exhibit, the local BGP router is receiving IPv4 routes from the BGP neighbor, but it is not receiving L3 VPN routes from the BGP neighbor.
Which two actions should you take to solve this problem? (Choose two.)
A. Configure the family inet-vpn unicast statement on the BGP neighbor.
B. Configure the family inet unicast statement on the local BGP router.
C. Configure the family inet-vpn unicast statement on the local BGP router.
D. Configure the family inet unicast statement on the BGP neighbor.
Correct Answer: AC
…
Lead4Pass provides complete Juniper certification exam material and guarantees all candidates successfully pass the JNCIP-SP JN0-663 certification exam on the first try.
Candidates are welcome to download the latest JN0-663 dumps: https://www.leads4pass.com/jn0-663.html (PDF +VCE).
BTW, share JNCIP-SP JN0-663 dumps PDF for free to help you understand some exam questions: https://drive.google.com/file/d/1OtqEmRjzgFQxk0W3rG1yKZPz5qzRehOL/