[Update May 2022] Latest JNCP JN0-361 dumps exam material
The latest JNCP JN0-361 dumps exam material has 542 exam questions and answers, verified by Juniper-certified experts to be true and valid, candidates download JN0-361 dumps with PDF and VCE: https://www.leads4pass.com/jn0-361.html
Seriously practice the latest JNCP JN0-361 exam questions and answers with a 100% guarantee of passing the exam. Plus 365 days of free updates and a 15% discount code: “juniper” from Lead4Pass Professional Certification Materials Center.
Free share JNCP JN0-361 dumps PDF for candidate detection:
https://drive.google.com/file/d/10BLskr0Yep9en0Tshy979Qxk49MIw9a3/
Read the latest JNCP JN0-361 dumps exam questions and answers online
| Number of exam questions | Exam name | From | Release time |
| 15 | Service Provider Routing and Switching, Specialist Exam | Lead4Pass | May 05, 2022 |
New Question 1:
Which Junos platform supports provider bridging?
A. T Series devices
B. SRX Series devices
C. MX Series devices
D. MAG Series devices
Correct Answer: B
New Question 2:
Which two routing-instance types are used for non-VPN-related applications? (Choose two.)
A. virtual-router
B. vrf
C. forwarding
D. vpls
Correct Answer: AC
New Question 3:
A network administrator has been asked to configure the most specific aggregate route to summarize the four specific prefixes shown below:
10. .5.0/24
10. .12.0/24
10. .17.0/24
10. .21.0/24
Which configuration completes this task?
A. [edit routing-options] user@router# show aggregate { route 10. .0.0/19; }
B. [edit routing-options] user@router# show aggregate { route 10. .0.0/20; }
C. [edit routing-options] user@router# show aggregate { route 10. .0.0/21; }
D. [edit routing-options] user@router# show aggregate { route 10. .0.0/18; }
Correct Answer: A
New Question 4:
Which statement correctly describes unified in-service software upgrades (ISSU)?
A. Unified ISSU is built upon graceful-restart extensions to allow upgrades with no impact to the data plane.
B. Unified ISSU is supported on systems with single or dual Routing Engines.
C. Unified ISSU permits both upgrades and downgrades with no control plane disruption and is based on the graceful Routing Engine switchover (GRES) feature.
D. Unified ISSU is based on nonstop-routing (NSR) and graceful Routing Engine switchover (GRES), and permits software upgrades only.
Correct Answer: D
New Question 5:
Which high availability feature is enabled by default on Junos devices?
A. nonstop active routing
B. root protection
C. nonstop forwarding D. graceful Routing Engine switchover
Correct Answer: C
New Question 6:
What is the reason for an OSPF router to display a designated router ID of 0.0.0.0?
A. The MTU is mismatched.
B. The subnet mask is mismatched.
C. The interface type is point-to-point.
D. The interface type is broadcast.
Correct Answer: C
New Question 7:
You have entered the show OSPF route command and see routes with a metric type of EXT2.
What does this indicate?
A. These routes are OSPF interarea routes.
B. These routes have been redistributed into OSPF and are using a Type 2 metric.
C. These routes are preferred over the same routes with an EXT1 metric.
D. These routes are OSPF intra-area routes.
Correct Answer: B
New Question 8:
You are troubleshooting an OSPF adjacency that is stuck in the ExStart state.
What would be the correct step to resolve the problem?
A. Look for a mismatched IP subnet or mask.
B. Determine whether the neighbor is a DR-Other.
C. Determine whether the hello and dead intervals are the same on both sides.
D. Review the MTU settings to ensure that they match.
Correct Answer: D
New Question 9:
You are asked to redistribute routes into OSPF.
Which action accomplishes this task?
A. Create a redistribution policy and apply it as an export policy under the [edit protocols OSPF area] hierarchy.
B. Create a redistribution policy and apply it as an import policy in the [edit protocols ospf] hierarchy.
C. Create a redistribution policy and apply it as an import or an export policy in the [edit protocols ospf] hierarchy.
D. Create a redistribution policy and apply it as an export policy in the [edit protocols ospf] hierarchy.
Correct Answer: D
New Question 10:
Which IS-IS PDU is used to request a retransmission of a missing link-state packet?
A. the complete sequence number PDU
B. the partial sequence number PDU
C. a hello PDU with a request PDU TLV specifying the missing LSP
D. a hello PDU with a refresh PDU TLV requesting all LSPs
Correct Answer: B
New Question 11:
Which statement is true regarding the IS-IS designated intermediate system (DIS)?
A. The DIS function is used only on broadcast or multi-access networks.
B. The DIS function is used on both broadcast and point-to-point link types.
C. On a broadcast network, adjacencies are formed only between the non-DIS nodes and the DIS to help reduce adjacency overhead.
D. IS-IS supports a backup DIS mechanism to provide rapid failover in the event of a DIS failure.
Correct Answer: A
New Question 12:
What are the two similarities between OSPF and IS-IS? (Choose two.)
A. Both use hello packets to form and maintain adjacencies.
B. Both use the Dijkstra algorithm to construct a shortest-path tree.
C. Both elect a designated router and a backup designated router.
D. Both have a built-in mechanism to provide address summarization between areas.
Correct Answer: AB
New Question 13:
Which statement describes the role of local preference in the BGP route selection process?
A. Local preference is evaluated early in the BGP route selection process and results in the route with the highest numerical local preference being selected.
B. Local preference is evaluated early in the BGP route selection process and results in the route with the lowest numerical local preference being selected.
C. Local preference is used to break ties when all other received BGP attributes are otherwise equal.
D. Local preference is sent by an EBGP speaker to a neighboring AS in an attempt to influence how the remote peer\’s traffic will ingress into your network.
Correct Answer: A
New Question 14:
Which three BGP attributes are used for loop prevention? (Choose three.)
A. AS path
B. originator ID
C. next hop
D. cluster list
E. origin
Correct Answer: ABD
New Question 15:
You are attempting to influence return traffic into your autonomous system by preferring one router as an entry point.
Which two BGP attributes will affect this behavior? (Choose two.)
A. originator ID
B. local preference
C. AS path
D. MED
Correct Answer: CD
Lead4Pass provides complete Juniper certification exam material and guarantees all candidates successfully pass the JNCP JN0-361 certification exam on the first try.
Candidates are welcome to download the latest JN0-361 dumps: https://www.leads4pass.com/jn0-361.html (PDF +VCE).
BTW, share JNCP JN0-361 dumps PDF for free to help you understand some exam questions: https://drive.google.com/file/d/10BLskr0Yep9en0Tshy979Qxk49MIw9a3/