[Update Api 2022] Latest JNCIP-ENT JN0-647 dumps exam material
Latest JNCIP-ENT JN0-647 dumps exam material has 75 exam questions and answers, verified by Juniper-certified experts to be true and valid, candidates download JN0-647 dumps with PDF and VCE: https://www.leads4pass.com/jn0-647.html
Seriously practice the latest JNCIP-ENT JN0-647 exam questions and answers with a 100% guarantee of passing the exam. Plus 365 days of free updates and a 15% discount code: “juniper” from Lead4Pass Professional Certification Materials Center.
Free share JNCIP-ENT JN0-647 dumps PDF for candidate detection:
https://drive.google.com/file/d/1gHNqpUBGYITFr0jYNkR3_cEKGlU46XKB/
Read the latest JNCIP-ENT JN0-647 dumps exam questions and answers online
| Number of exam questions | Exam name | From | Release time |
| 15 | Enterprise Routing and Switching Exam | Lead4Pass | April 03, 2022 |
New Question 1:
Your network supports multicast traffic but your provider network does not. You want to allow multicast hosts outside of your network to receive multicast traffic sourced within your network. How would you satisfy this requirement?
A. Use MSDP peering with your provider.
B. Use AutoVPN to connect to the remote hosts.
C. Use an MP-BGP session with your provider to pass multicast traffic.
D. Use an automatic multicast tunnel gateway at the edge of your network.
Correct Answer: D
New Question 2:
Click the exhibit.
Referring to the exhibit, traffic handled by the s-1 scheduler is out of profile. Assuming bandwidth is available in this scenario, which statement is correct?
A. Traffic handled by the s-1 scheduler is serviced immediately after traffic being serviced by the s-4 scheduler.
B. Traffic handled by the s-1 scheduler is serviced immediately before traffic being serviced by the s-4 scheduler.
C. Traffic handled by the s-1 scheduler is serviced immediately before traffic being serviced by the s-2 scheduler.
D. Traffic handled by the s-1 scheduler is serviced immediately after traffic being serviced by the s-2 scheduler.
Correct Answer: D
New Question 3:
Click the Exhibit.
Referring to the exhibit, which set of interfaces will be registered by MVRP?
A. ge-0/1/0, ge-0/1/1, ae0, ae1 B. ge-0/1/0, ge-0/0/2, ae0, ae1
C. ge-0/0/1, ge-0/1/1, ae0, ae1
D. ge-0/0/1, ge-0/0/2, ae0, ae1
Correct Answer: D
New Question 4:
Click the Exhibit button.
You are configuring a new BGP session between router1 and router2. The session does not establish.
Referring to the exhibit, what must be done to establish this session?
A. You must define the peer-as number on router2.
B. You must define the autonomous- system number under the [edit routing-options] hierarchy on router1.
C. You must specify the type as external on both devices.
D. You must specify the local address on both devices.
Correct Answer: D
New Question 5:
Click the Exhibit button.
You are asked to advertise the 1.0.0.0/8 and 1.5.5.5/32 routes to your 10.254.32.2 BGP peer.
Referring to the exhibit, which configuration change would satisfy this requirement?
A. Remove the export-to- as81 policy.
B. Change the export-to- as81 policy to or longer.
C. Remove the reject-routes policy.
D. Change the reject-routes policy to longer.
Correct Answer: B
New Question 6:
Your campus EX9200 core devices are highly oversubscribed on bandwidth and reporting massive dropped packets. To immediately address the issue, you decide to implement shaping on all interfaces.
Which action will accomplish?
A. Apply the input-shape-rate 5G parameter to all interfaces under the [edit class-of service] hierarchy.
B. Define a CoS input traffic control profile with the shape-rate 5G parameter and apply it to all interfaces.
C. Define a CoS output traffic control profile with the shape-rate 5G parameter and apply it to all interfaces.
D. Apply the shape-rate 5G parameter to all interfaces under the [edit class-of service] hierarchy.]
Correct Answer: D
New Question 7:
What allows non-Web-enabled devices to access the network on a port configured for a captive portal?
A. A MAC address white list can be configured on the switch to allow specific MAC addresses to bypass the captive portal process.
B. LLDP can be used to query the type of device that is attempting to access the network, and predefined device types can be allowed to bypass the captive portal process.
C. Captive portal can be configured to only prompt for credentials when HTTP or HTTPS traffic is requested on a port to allow on-HTTP-enabled devices access to the network.
D. Authentication credentials for specific devices can be preconfigured on the switch for automatic authentication.
Correct Answer: A
New Question 8:
Click the Exhibit button.
Router1, in peer AS 65001, advertises routes to R2 using EBGP. R2 advertises the routes learned from R1 to R3 using IBGP. R3 is configured as a route reflector with routers R6 and R7 as clients. Referring to the exhibit, to which routers will R3 advertise the BGP routes received from R2?
A. R6, R7
B. R4, R5
C. R2, R4, R5, R6, R7
D. R4, R5, R6, R7
Correct Answer: D
New Question 9:
Click the Exhibit button.
Referring to the exhibit which two statements are true? (Choose two.)
A. Untagged control packets entering interface ge-0/0/1 are not recognized.
B. Untagged data packets entering interface ge-0/0/2 will be tagged with VLAN ID 20.
C. Untagged control packets entering interface ge-0/0/3 are passed without a VLAN tag.
D. Untagged data packets entering interface ge-0/0/3 will be tagged with VLAN ID 1.
Correct Answer: BD
New Question 10:
When configuring a class of service, what would you use to allocate bandwidth to a forwarding class?
A. Buffer depth
B. Transmit rate
C. Bandwidth
D. Speed
Correct Answer: B
New Question 11:
Click the Exhibit button.
Which AS path matches the AS path regular expression shown in the exhibit?
A. 65100 65200 21870 21870
B. 65100 65101 65200 21870 21870
C. 65100 21870 65200 65300
D. 65100 65101 65200 65300 21870
Correct Answer: B
New Question 12:
Click the Exhibit button.
Referring to the exhibit, you are receiving multiple routes from ISP3 through two EBGP neighbors. You must ensure that all traffic leaving R1 destined to the networks advertised by ISP3 go through ISP2. What should you do on R1 to accomplish this task?
A. Create and apply an import policy to set the local preference on routes learned from ISP2 to be lower than those learned from ISP1.
B. Create and apply an import policy to set the route preference on routes learned from ISP2 to be lower than those learned from ISP1.
C. Create and apply an import policy to set the route preference on routes learned from ISP2 to be higher than those learned from ISP1.
D. Create and apply an import policy to set the local preference on routes learned from ISP2 to be higher than those learned from ISP1.
Correct Answer: D
New Question 13:
Click the Exhibit.
Referring to the exhibit, which two statements are correct? (Choose two.)
A. The satellite device has two ports that are not online.
B. The satellite device has 14 network-facing ports available.
C. The satellite device is in a state of transition.
D. The satellite device can support up to 48 total ports.
Correct Answer: AD
New Question 14:
Which two statements are true about 802.1X dynamic filters based on RADUIS attributes? (Choose two.)
A. Filters can be defined on the network management system and deployed using vendor-specific attributes.
B. Filters can be defined on the switch and deployed upon authentication.
C. Filters can be defined on an automation framework and deployed when triggered by an authentication syslog message.
D. Filters can be defined on the authentication server and deployed using vendor-specific attributes.
Correct Answer: BD
New Question 15:
Click the Exhibit button.
All of the clients attached to your EX4300 report that authentication to the network is abnormally slow. While troubleshooting, you individually test the RADIUS servers used for authentication and receive the information shown in the exhibit.
What happened to the RADIUS server 172.28.30.95?
A. The server is no longer reachable.
B. The RADIUS daemon went offline.
C. There is a RADIUS version mismatch.
D. Someone changed the RADIUS secret.
Correct Answer: D
…
Lead4Pass provides complete Juniper certification exam material and guarantees all candidates successfully pass the JNCIP-ENT JN0-647 certification exam on the first try.
Candidates are welcome to download the latest JN0-647 dumps: https://www.leads4pass.com/jn0-647.html (PDF +VCE).
BTW, share JNCIP-ENT JN0-647 dumps PDF for free to help you understand some exam questions: https://drive.google.com/file/d/1gHNqpUBGYITFr0jYNkR3_cEKGlU46XKB/