Prepare for the Juniper JN0-363 JNCIS-SP Certification Exam | JN0-363 dumps
Juniper JN0-363 JNCIS-SP certification exam validates your fundamental understanding of routing and switching technologies and related platform configuration and troubleshooting skills!
Lead4Pass has collected 65 latest JN0-363 exam questions and answers, covering the complete practical exam! You can use the JN0-363 dumps with PDF and VCE: https://www.leads4pass.com/jn0-363.html to prepare for the exam.
Both JN0-363 dumps PDF and JN0-363 dumps VCE contain the latest exam questions and answers, you can choose according to your learning habits, and you are guaranteed to pass the Juniper JN0-363 JNCIS-SP certification exam 100%.
Highlight
Juniper JN0-363 Online Exam Practice
From | Number of exam questions | Exam name | Exam code |
Lead4Pass | 13 | Service Provider Routing and Switching Specialist (JNCIS-SP) | JN0-363 |
QUESTION 1:
Exhibit
You are advertising a summary route that represents your local network (172.20.0.0716) to both ISP A and ISPB. You
want to influence all traffic sent to you from ISP C to go through R2.
How would you accomplish this task?
A. On R1, prepend your AS number three times on the 172.20.0.0/16 route when advertising It to ISP 1.
B. On R1, change the local preference value to 250.
C. On R2. prepend your AS number three times on the 172.20.0.0/16 route when advertising it to ISP 2.
D. On R2, change the local preference value to 50.
Correct Answer: B
QUESTION 2:
LSI1 A AS 65501 ISPB AS 65502 Advertised Prefixes: 172.20.0.0/24 172.20.20.0/24 172.20.21.0/24 Advertised
Prefixes: 172.20.0.0/24 172.20.1.0/24
Referring to the exhibit, which two statements are correct? (Choose two.)
A. Devices in AS 65512 will prefer ISP A for traffic destined to the 172.20.21.0/24 network.
B. Devices In AS 65512 will prefer ISP A for traffic destined to the 172.20.0.0/24 network.
C. Devices in AS 65512 will prefer ISP B for traffic destined to the 172.20.21.0/24 network.
D. Devices In AS 65512 will prefer ISP B for traffic destined to the 172.20.0.0/24 network.
Correct Answer: C
QUESTION 3:
Which two statements ate correctly about the BGP next-hop attribute value? (Choose two.)
A. By default, the next-hop value is changed across IBGP links.
B. By default, the next-hop value is changed across EBGP links.
C. By default, the next-hop value is not changed across IBGP links.
D. By default, the next-hop value is not changed across EBGP links.
Correct Answer: A
QUESTION 4:
Exhibit Referring to the exhibit, which router will be elected as the primary VRRP router?
Routers R1 and R4 have a VRRP priority of 90, while R2 and R3 have default VRRP priorities
A. R3
B. R4
C. R2
D. R1
Correct Answer: D
QUESTION 5:
Exhibit
You are asked to configure OSPF between routers R1 and R2 using IPv6 addresses. Which two tasks will accomplish
your objective? (Choose two.)
A. Issue the set protocols ospf area 0.0.0.0 interface ge-0/0/1.0 command.
B. Under the [edit routing-options] hierarchy, configure a 32-bit router ID.
C. issue the set protocols ospf3 area 0.0.0.0 interface ge-0/0/1.0 command.
D. Under the [edit routing-options] hierarchy, configure a 128-bit router ID.
Correct Answer: AD
QUESTION 6:
Which statement is correct about IS-IS?
A. IS-IS is a distance vector routing protocol.
B. IS-IS is a path vector routing protocol.
C. IS-IS is a link-state routing protocol.
D. IS-IS is a classful routing protocol.
Correct Answer: C
QUESTION 7:
Exhibit
You are asked to assign interface xe-1/0/5 to a virtual switch. What must be accomplished to complete the
configuration?
A. Interface xe-1/0/5 must be added to routing-instance sw-1 vlan_2.
B. Interface xe-1/0\’5 must be a trunk port.
C. Interface xe-1/0/5 must be added to routing-instance sw-1.
D. An IRB interface must be configured to routing-instance sw-1 vlan_2.
Correct Answer: C
QUESTION 8:
Which BGP attribute Is used to detect routing loops?
A. AS path
B. MED
C. local preference
D. next hop
Correct Answer: A
QUESTION 9:
Which statement is correct about the FE80:/10 prefix?
A. This prefix range is used for the link-local address.
B. This prefix range is used on the loopback interface.
C. This prefix range is reserved for multicast applications
D. This prefix range is not reserved.
Correct Answer: A
QUESTION 10:
Exhibit
You configured interface ge-0/070.0 to run IS-IS. but this interface does not appear in the output of the show isis
adjacency command as shown in the exhibit.
What is the problem in this scenario?
A. This is a Gigabit Ethernet interface, that is incompatible with the reference-bandwidth 100g statement.
B. The family iso statement must be added to the logical interface.
C. The router at the other end of the link Is not sending any IS-IS Hello messages.
D. The router at the other end of the link is a Level 1-only router.
Correct Answer: B
QUESTION 11:
Exhibit
Referring to the exhibit, what will happen to untagged frames?
A. The untagged frames are dropped.
B. The untagged frames are load balanced between VLAN 10 and VLAN 20.
C. The untagged frames are associated with VLAN 10.
D. The untagged frames are associated with VLAN 20.
Correct Answer: A
QUESTION 12:
Exhibit
The LSP is not established correctly.
Referring to the exhibit, what should you do to solve the problem?
A. Enable traffic engineering for the OSPF protocol.
B. Enable traffic engineering for the IS-IS protocol.
C. Enable traffic engineering for the BGP protocol.
D. Enable traffic engineering for the RSVP protocol.
Correct Answer: D
QUESTION 13:
Exhibit
Referring to the exhibit, what is the minimum number of LSPs required to support alt four networks?
A. 1
B. 2
C. 8
D. 4
Correct Answer: C
…
PS. Download the above JN0-363 Exam Questions and answers: https://drive.google.com/file/d/1eCzcSrFBqHmY7hGuS0hjd_caetKVLU_J/
Suitable for JN0-363 JNCIS-SP certified jobs
Earning a JNCIS-SP certification (JN0-363) from Juniper Networks can open up a variety of career opportunities in service provider networking. Here are some job roles that may be suitable for JNCIS-SP-certified professionals:
Network Engineer: As a network engineer, you would be responsible for designing, implementing, and maintaining service provider networks. Your expertise in Juniper routing and switching technologies will be highly valued in this role.
Network Administrator: Network administrators are responsible for managing and maintaining the day-to-day operations of computer networks. With a JNCIS-SP certification, you can handle the configuration, monitoring, and troubleshooting of service provider networks using Juniper devices.
Network Operations Center (NOC) Engineer: NOC engineers work in a 24/7 environment, monitoring network performance, troubleshooting issues, and ensuring the availability of network services. Your JNCIS-SP certification will provide you with the necessary skills to work in a service provider NOC.
Technical Support Engineer: In this role, you would provide technical assistance to customers and clients who are experiencing network-related problems. Your JNCIS-SP certification will give you the expertise to troubleshoot and resolve issues with Juniper devices in a service provider environment.
Pre-sales Engineer: Pre-sales engineers work closely with sales teams, providing technical expertise and assisting in the design and implementation of network solutions for customers. With a JNCIS-SP certification, you can contribute to the design and deployment of Juniper-based service provider networks.
Network Consultant: As a network consultant, you would provide expert advice and guidance to clients on designing and optimizing their network infrastructure. Your JNCIS-SP certification will enhance your credibility and demonstrate your proficiency in service provider technologies.
These are just a few examples of job roles that may be suitable for JNCIS-SP-certified professionals. The specific job opportunities available to you will depend on factors such as your overall experience, additional certifications, and the requirements of the organizations you are applying to.
Finally, I want to say:
Juniper JN0-363 JNCIS-SP certification exam is a very professional exam, getting certified can help you get more job options, JN0-363 dumps: https://www.leads4pass.com/jn0-363.html
It is a complete and effective test preparation program designed to help you study efficiently and pass the test successfully, saving you money!
PS. Follow here! Unscheduled Juniper free exam practice questions to share online!
Good luck!