Juniper Enterprise Routing and Switching, Specialist Exam: JN0-348 dumps is a valid, viable plan

Lead4Pass has updated the JN0-348 dumps with 92 exam questions and answers, verified, real and valid, covering the complete Juniper Enterprise Routing and Switching, Specialist actual exam questions, and a truly valid exam plan.

Before taking the Juniper Networks Enterprise Routing and Switching Specialist (JNCIS-ENT) exam, you must pass the JN0-104 (JNCIA-Junos) exam. And in 2022 you should take the JN0-349 (JNCIS-ENT) certification exam, this change will replace the JN0-348 (JNCIS-ENT) certification exam.
So passing the Juniper Enterprise Routing and Switching, Specialist Exam is not difficult, you just need to practice the JN0-348 dumps provided by Lead4Pass: https://www.leads4pass.com/jn0-348.html, don’t leave any questions, and make sure you pass the exam on the first try.

Practice a portion of the JN0-348 Dumps exam questions online:

Tips: The answer will be announced at the end of the article

QUESTION 1:

An EBGP session sources its TCP connection from which IP address?

A. The IP address assigned as the router ID.
B. The IP address of the preferred address assigned to the loopback interface.
C. The IP address of the primary address assigned to the loopback interface.
D. The IP address of the interface that connects the two BGP speakers.

QUESTION 2:

Click the Exhibit button.

Referring to the exhibit, why is the route for 10.5.5.5 hidden?

A. It is a martian route.
B. It has an invalid community.
C. It is an L3VPN route.
D. The next hop cannot be resolved.

QUESTION 3:

Click the Exhibit button.

Referring to the exhibit, Router-1 and Router-2 are failing to form an IS-IS adjacency.
What should you do to solve the problem?

A. Remove the overloaded statement from Router-1.
B. Change the IP subnet masks to match on the ge-0/0/2 interfaces of both routers.
C. Change the ISO areas on the lo0 interfaces to match on both routers.
D. Remove the ISO address from ge-0/0/2 on Router-1.

QUESTION 4:

Click the Exhibit button.

You are attempting to set up VRRP with R1 and R2 being participating members. You want R1 to be the master router and R2 to be the backup router with the virtual router they create being at address 172.25.100.1. The virtual router is not pinging from either User A or User B.
Referring to the exhibit, what must be done to correct the problem?

A. A VRRP policy is needed on R1 and R2.
B. The VRRP group value on R1 and R2 must match.
C. The VRRP priority value on R1 and R2 must match.
D. A VRRP authentication type value is needed on R1 and R2.

QUESTION 5:

Click the Exhibit button.

Both the R1 and R2 devices are advertising prefix X into AS 65530 with the BGP attributes shown in the exhibit. Which statement is correct in this scenario?

A. R2\’s version of prefix X will be active because of the local preference attribute.
B. R1\’s version of prefix X will be active because of the local preference attribute.
C. R1\’s version of prefix X will be active because of the AS path attribute.
D. R2\’s version of prefix X will be active because of the AS path attribute.

QUESTION 6:

Click the Exhibit button.

Referring to the exhibit, what is the problem?

A. The LAG member interfaces are configured across different line cards
B. LAG requires more than two member links
C. LACP is required for LAG to work
D. Aggregated interfaces must be defined under the chassis stanza

QUESTION 7:

Which statement is true when using LAGs with an EX4300?

A. Speeds on member links can differ.
B. Member links must be contiguous.
C. Half duplex is supported on the LAG.
D. You can have up to 16 member links per LAG.

QUESTION 8:

Click the Exhibit button.

Referring to the exhibit, what will be the IS-IS adjacency result of the configurations?

A. No IS-IS adjacencies will form.
B. A level 1 and level 2 IS-IS adjacency will form.
C. A level 2 IS-IS adjacency will form.
D. A level 1 IS-IS adjacency will form.

QUESTION 9:

Click the Exhibit button.

Referring to the output shown in the exhibit, which statement is correct?

A. 11.0.0.108/32 is being per-flow load-balanced
B. 11.0.0.102/32 is being per-packet load-balanced
C. 11.0.0.102/32 is being per-flow load-balanced
D. 11.0.0.108/32 is being per-packet load-balanced

QUESTION 10:

Which two elements are used to create the STP bridge ID? (Choose two.)

A. the root port number
B. the bridge priority value
C. the system MAC address
D. the port cost

QUESTION 11:

Click the Exhibit button.

You want to prevent rogue BPDUs from lab devices from reaching the internal through the Lab_Switch device. Referring to the exhibit, what should be done to accomplish this task?

A. Configure the three lab ports as edge ports

B. Configure an input filter on interface xe-0/2/0 to discard the RSTP packets

C. Configure the three lab ports under the protocols layer2-control bpdu-block hierarchy on the switch

D. Configure protocols rstp with the bpdu-block-on-edge parameter for interface xe-0/2/0

QUESTION 12:

You want to configure your Junos device so that routing information from certain prefixes on a neighboring router is ignored.
What should you configure on your device?

A. It interface
B. firewall rule
C. martian address
D. vt interface

QUESTION 13:

Click the Exhibit button.

In the exhibit, each IP subnet in the network is associated with a unique VLAN ID. Which action will ensure that Host C will communicate with Host A and Host B?

A. Configure an IRB interface for each VLAN and associate it with its corresponding VLAN

B. Configure a port-based ACL that permits inter-VLAN routing for all configured VLANs

C. Configure all switch ports connecting to the host devices as trunk ports associated with all VLANs

D. Configure all switch ports connecting to the host devices as access ports associated with a common VLAN

Verify the answer:

Numbers:

Q10

Q11

Q12

Q13

Answers:

[PDF Download] The above JN0-348 exam questions and answers are available for download: https://drive.google.com/file/d/1QwtzYtZLRnolPQj748dbsLy28lLkUFQo/

The above JN0-348 exam practice questions can only help you warm up, Lead4Pass provides a valid plan for the Juniper Enterprise Routing and Switching, Specialist Exam: https://www.leads4pass.com/jn0-348.html (JN0-348 dumps).