[Update Mar 2022] Latest JNCIS-SEC JN0-333 dumps exam material
The latest JNCIS-SEC JN0-333 dumps exam material has 75 exam questions and answers, verified by Juniper-certified experts to be true and valid, candidates download JN0-333 dumps with PDF and VCE: https://www.leads4pass.com/jn0-333.html
Seriously practice the latest JNCIS-SEC JN0-333 exam questions and answers with a 100% guarantee of passing the exam. Plus 365 days of free updates and a 15% discount code: “juniper” from Lead4Pass Professional Certification Materials Center.
Free share JNCIS-SEC JN0-333 dumps PDF for candidate detection:
https://drive.google.com/file/d/1maTVWE9awxCBCE1lQvYDZc6igdUep0ni/
Read the latest JNCIS-SEC JN0-333 dumps exam questions and answers online
Number of exam questions | Exam name | From | Release time |
15 | Security, Specialist (JNCIS-SEC) | Lead4Pass | Mar 07, 2022 |
New Question 1:
You are asked to change when your SRX high availability failover occurs. One network interface is considered more important than others in the high availability configuration. You want to prioritize failover based on the state of that interface.
Which configuration would accomplish this task?
A. Create a VRRP group configuration that lists the reth\’s IP address as the VIP while using each physical interface that make up the reth definition of each SRX HA pair.
B. Configure IP monitoring of the important interface\’s IP address and adjust the heartbeat interval and heartbeat threshold to the shortest settings.
C. Create a separate redundancy group to isolate the important interface; set the priority of the new redundancy group to 255.
D. Configure the interface monitor inside the redundancy group that contains the important physical interface; adjust the weight associated with the monitored interface to 255.
Correct Answer: D
New Question 2:
What are three characteristics of session-based forwarding, compared to packet-based forwarding, on an SRX Series device? (Choose three.)
A. Session-based forwarding uses stateful packet processing.
B. Session-based forwarding requires less memory.
C. Session-based forwarding performs faster processing of existing session.
D. Session-based forwarding uses stateless packet processing,
E. Session-based forwarding uses six tuples of information.
Correct Answer: ACE
New Question 3:
You have configured source NAT with port address translation. You also need to guarantee that the same IP address is assigned from the source NAT pool to a specific host for multiple concurrent sessions.
Which NAT parameter would meet this requirement?
A. port block-allocation
B. port range twin-port
C. address-persistent
D. address-pooling paired
Correct Answer: D
New Question 4:
Click the Exhibit button.
Referring to the exhibit, what will happen if client 172.16.128.50 tries to connect to destination 192.168.150.111 using HTTP?
A. The client will be denied by policy p2.
B. The client will be denied by policy p1.
C. The client will be permitted by policy p2.
D. The client will be permitted by policy p1.
Correct Answer: D
New Question 5:
Click the Exhibit button.
Which feature is enabled with destination NAT as shown in the exhibit?
A. NAT overload
B. block allocation
C. port translation
D. NAT hairpinning
Correct Answer: D
New Question 6:
Which two statements about security policy actions are true? (Choose two.)
A. The log action implies an accept action.
B. The log action requires an additional terminating action.
C. The count action implies an accept action.
D. The count action requires an additional terminating action.
Correct Answer: BD
New Question 7:
Which feature is used when you want to permit traffic on an SRX Series device only at specific times?
A. scheduler
B. pass-through authentication
C. ALGs
D. counters
Correct Answer: A
New Question 8:
Click the Exhibit button.
You are monitoring traffic, on your SRX300 that was configured using the factory default security parameters. You notice that the SRX300 is not blocking traffic between Host A and Host B as expected.
Referring to the exhibit, what is causing this issue?
A. Host B was not assigned to the Untrust zone.
B. You have not created address book entries for Host A and Host B.
C. The default policy has not been committed.
D. The default policy permits intrazone traffic within the Trust zone.
Correct Answer: D
New Question 9:
What is the function of redundancy group 0 in a chassis cluster?
A. Redundancy group 0 identifies the node controlling the cluster management interface IP addresses.
B. The primary node for redundancy group 0 identifies the first member node in a chassis cluster.
C. The primary node for redundancy group 0 determines the interface naming for all chassis cluster nodes.
D. The node on which redundancy group 0 is primary determines which Routing Engine is active in the cluster.
Correct Answer: D
New Question 10:
After an SRX Series device processes the first packet of a session, how are subsequent packets for the same session processed?
A. They are processed using fast-path processing.
B. They are forwarded to the control plane for deep packet inspection.
C. All packets are processed in the same manner.
D. They are queued on the outbound interface until a matching security policy is found.
Correct Answer: A
New Question 11:
Which interface is used exclusively to forward Ethernet-switching traffic between two chassis cluster nodes?
A. swfab0
B. fxp0
C. fab0
D. me0
Correct Answer: A
New Question 12:
Which SRX5400 component is responsible for performing first-pass security policy inspection?
A. Routing Engine
B. Switch Control Board
C. Services Processing Unit
D. Modular Port Concentrator
Correct Answer: C
New Question 13:
Click the Exhibit button.
The inside server must communicate with the external DNS server. The internal DNS server address is 10.100.75.75. The external DNS server address is 75.75.76.76. Traffic from the inside server to the DNS server fails. Referring to the exhibit, what is causing the problem?
A. The security policy must match the translated destination address.
B. Source and static NAT cannot be configured at the same time.
C. The static NAT rule must use the global address book entry name for the DNS server.
D. The security policy must match the translated source and translated destination address.
Correct Answer: A
New Question 14:
You need to configure an IPsec tunnel between a remote site and a hub site. The SRX Series device at the remote site receives a dynamic IP address on the external interface that you will use for IPsec. Which feature would you need to configure in this scenario?
A. NAT-T
B. crypto suite B
C. aggressive mode
D. IKEv2
Correct Answer: C
New Question 15:
You want to ensure that any certificates used in your IPsec implementation do not expire while in use by your SRX Series devices.
In this scenario, what must be enabled on your devices?
A. RSA
B. TLS
C. SCEP
D. CRL
Correct Answer: C
…
Lead4Pass provides complete Juniper certification exam material and guarantees all candidates successfully pass the JNCIS-SEC JN0-333 certification exam on the first try.
Candidates are welcome to download the latest JN0-333 dumps: https://www.leads4pass.com/jn0-333.html (PDF +VCE).
BTW, share JNCIS-SEC JN0-333 dumps PDF for free to help you understand some exam questions: https://drive.google.com/file/d/1maTVWE9awxCBCE1lQvYDZc6igdUep0ni/