Juniper JN0-740 actual exam questions shared online

Leads4pass Juniper JN0-740 certification exam solutions are shared online, including 270 latest actual exam questions.

Juniper JN0-740 exam questions are available in PDF and VCE learning methods! Download Juniper JN0-740 actual exam questions with PDF and VCE: https://www.leads4pass.com/jn0-740.html to help you achieve 100% of your target plan.

Highlight:

  1. Actual Juniper JN0-740 exam questions and answers
  2. Complete and effective Juniper JN0-740 certification exam solution

Juniper JN0-740 actual exam questions online practice

ContributorNumber of exam questionsDownloadRelated
Leads4Pass270 Q&ARegister(Leads4pass.com)JNCIS-SP, JNCIS-ENT

Question 1:

Which statement about hashing algorithms is correct?

A. They are used to provide data source origin authentication.

B. The output they generate varies based on the input data size.

C. They can be used instead of encryption algorithms for IPSec-based VPN networks.

D. The output they generate is reversible provided the same key is used at both end devices.

Correct Answer: A

Question 2:

Which two statements about AH packets are accurate? (Choose two.)

A. AH authenticates the complete packet.

B. AH offers enhanced security over ESP.

C. AH allows the creation of unencrypted VPN networks.

D. AH cannot traverse NAT devices when operating in transport mode.

Correct Answer: CD

Question 3:

— Exhibit –

Juniper JN0-740 actual exam questions 3

— Exhibit -Click the Exhibit button to view the exhibit. Review the exhibit. You need to make a bidirectional gateway between the 5XT and the 208. What

gateway address will you configure on the 208 for the VPN?

A. 10.0.0.1

B. 20.0.0.1

C. 1.1.1.250

D. 4.4.4.250

Correct Answer: C

Question 4:

In the command save config from tftp 1.1.7.250 abcd.cfg merge, what function does the \’merge\’ parameter specify?

A. The config file from the TFTP server will replace the configuration in RAM

B. The config file from the TFTP server will replace the startup configuration file in Flash

C. The \’merge\’ parameter is not valid for TFTP files, it is only valid for configuration files stored in Compact Flash

D. The config file from the TFTP server will be combined with the configuration file in RAM and the combined result will be saved to Flash

E. The config file from the TFTP server will be combined with the configuration file in RAM and the startup configuration file will remain unchanged

Correct Answer: D

Question 5:

You are looking at your policies via the Web UI and you notice that the green permit policy has turned blue. What would cause this?

A. The policy is currently inactive

B. The policy is configured to support a MIP

C. That the policy is configured for unidirectional NAT

D. The Policy has failed to pass permitted traffic due to a virus

E. The policy is currently passing traffic beyond its traffic limits and it is currently in alarm

Correct Answer: C

Question 6:

Assuming factory default settings, which statement describes the minimum requirements for WebUI management access?

A. Connect a PC addressed on the 192.168.1.0 subnet to any interface, open a browser, and access

192.168.1.1

B. Terminate the bootup sequence from the console device, open a browser on the console device, and access 192.168.1.1

C. Connect a PC addressed on the 192.168.1.0 subnet to the product-specific interface for the device, open a browser, and access 192.168.1.1

D. Using the CLI, define an IP address on a physical interface, connect a PC to the interface, and open a browser to the interface address.

Correct Answer: C

Question 7:

— Exhibit –

Juniper JN0-740 actual exam questions 7

— Exhibit -Click the Exhibit button.

In this route-based VPN configuration, where are the two policies going to be required? (Choose two.)

A. SSG 5 – trust to untrust

B. SSG 5 – untrust to trust

C. SSG 550 – trust to untrust

D. SSG 550 – untrust to trust

Correct Answer: CD

Question 8:

— Exhibit –

Juniper JN0-740 actual exam questions 8

— Exhibit -Click the Exhibit button to view the exhibit.

Review the exhibit. What would be the best routing command to allow host A to communicate with host B?

(Assume a route from the 208 to Host A\’s subnet already exists.)

A. set route0.0.0.0/0 int e2 gateway 192.168.1.254

B. set route 192.168.20.0 interface e1 gateway 192.168.1.254

C. configure route192.168.20.0/24 gateway 192.168.1.254 int e2

D. set route 192.168.20.0/24 interface e2 gateway 192.168.1.254

Correct Answer: D

Question 9:

What is the default mode for an interface in the untrust zone?

A. NAT

B. route

C. Layer 2

D. Layer 3

E. transparent

Correct Answer: B

Question 10:

An Access Policy must contain which three (3) items?

A. Service

B. Authentication

C. Source address

D. Firewall settings

E. Action (permit, deny, tunnel)

Correct Answer: ACE

Question 11:

Which ScreenOS CLI command would be useful for troubleshooting a policy denial?

A. get flow debug

B. debug flow basic

C. exec flow analysis

D. debug session basic

Correct Answer: B

Question 12:

Which ScreenOS CLI command would be used to add services to an existing multi-cell policy?

A. set service

B. set multiple services

C. set service multiple

D. set policy from trust to untrust any permit

Correct Answer: A

Question 13:

What is a DIP shift?

A. When specific addresses in the DIP pool require port translation and others do not

B. When a one-to-one mapping of a range of private addresses to a range of public addresses is needed

C. When a DIP has run out of addresses in the DIP pool and must “shift” to addresses from another pool instead

D. When a DIP pool is “shifted” to use an address pool in the network range of the secondary address instead of the primary address

Correct Answer: B

Question 14:

What is required to support policy-based NAT when using route-based VPNs?

A. Policy defined for VPN traffic.

B. Tunnel interface must be unnumbered.

C. The tunnel interface must have an IP address.

D. Tunnel interface must have a custom zone assigned.

Correct Answer: C

Question 15:

— Exhibit –

Juniper JN0-740 actual exam questions 15

— Exhibit -Click the Exhibit button to view the exhibit. For this policy to be effective, what order should the policy statements be in? The number refers to

the Policy ID is shown in the diagram.

A. 12345

B. 34251

C. 45321

D. 52134

E. 53124

Correct Answer: B

Juniper JN0-740 actual exam questions contain a total of 270 questions. Register at leads4Pass.com to get the complete Juniper JN0-740 actual exam questions with PDF and VCE to help you pass the exam successfully.